Marque du pilote / Designer Américain John Baresi.
"My name is John Barresi, and I am a kite flyer.
The design work here at Kite Forge is driven by nearly 30 years experience in recreational, performance and competition kite flying across 20 countries in just about every environment and condition you can imagine.
While these kites are available to the general public, they were not created as “products”, they were each designed to fulfill a level of performance and accessibility for me and my own team pilots so you can be certain what what we sell here is exactly what I fly, no mods, no tweaks, straight from the bag using only the built in adjustments and configurations.
My primary passions are single line gliders, dual line and quad line kites flown indoors or out, smoothly or aggressively, in smooth ocean breezes or urban chop, bent around a pole, wingtip to wingtip in formation, in the face of the wind or ultimately snatched right out of the air by your own hand, it never ceases to amaze me how deep the rabbit hole goes and how accessible it is to just about anyone, given decent kite gear and clear information.
The kites you’ll find on these pages are designed and built to help you go as deep as you want into the experience of total airborne control, supported by what I hope will be an ever expanding archive of tutorials covering the whole range of common sport kite disciplines from the absolute basics required for competency up through more advanced topics including indoor, urban, team flying, dogstake and more.
Regardless of where you buy your kites or what you fly, I hope that your experience(s) with Kite Forge and family are useful and inspiring.
Now go fly a kite!
JB"
Connecteur en T pour le cerf-volant quad line DJINN, utilisé pour la connexion entre les longerons verticaux et le bord d'attaque.
Une fois assemblé, chaque cerf-volant utilise deux de ces pièces.
Embouts en aluminium de haute qualité pour le DJINN, conçus pour une grande durabilité et une excellente fonction avec des trous séparés pour la bride et l'élastique.
Chaque cerf-volant utilise 4 de ces pièces.
Carbone "Mystic" pour cerf-volant 4 lignes DJINN.
Choisissez votre carbone pour la réparation du DJINN suivant la version de votre cerf-volant.
Paire de poignées 4 lignes en aluminium spécialement conçues pour le DJINN.
Cerf-volant 4 Lignes DJINNDOOR / Quad lines kite DJINNDOOR
Plage de vent / Wind Range : 0 - 3 mph / 0 - 5 km/h
Structure / frame : Mystic 10
Cerf-volant 4 Lignes Djinn ST / Quad lines kite Djinn ST
Plage de vent / Wind Range : 3 - 12 mph / 5 - 19 km/h
Structure / frame : Mystic 12
Envergure : 238 cm
Cerf-volant 4 Lignes Djinn UL / Quad lines kite Djinn UL
Plage de vent / Wind Range : 1 - 6 mph / 2 - 10 km/h
Structure / frame : Mystic 10
Envergure : 238 cm
Cerf-volant 4 Lignes Djinn UL / Quad lines kite Djinn UL
Plage de vent / Wind Range : 1 - 6 mph / 2 - 10 km/h
Structure / frame : Mystic 10
Envergure : 238 cm
Cerf-volant 4 Lignes Djinn MV / Quad lines kite Djinn MV
Plage de vent / Wind Range : 5 - 18 mph / 8 - 29 km/h
Structure / frame : Mystic 14
Envergure : 238 cm
Cerf-volant 4 Lignes Djinn VT / Quad lines kite Djinn VT
Plage de vent / Wind Range : 8 - 25 mph / 11 - 40 km/h
Structure / frame : Mystic 16
Envergure : 238 cm
Cerf-volant 4 Lignes Djinn XT / Quad lines kite Djinn XT
Plage de vent / Wind Range : 12-35 mph / 19 - 56 km/h
Structure / frame : Mystic 18
Envergure : 238 cm
Cerf-volant 4 Lignes Djinn HV / Quad lines kite Djinn HV
Plage de vent / Wind Range : 25-55 mph / 40-88 km/h
Structure / frame : Mystic 18
Envergure : 238 cm
